Drill Mills are designed for milling, chamfering, and light spotting applications. They come with two or four helical flutes each offered in included angles of 90 or 120 degrees. The cutter diameter sizes range from 1/8” to ½”.

Helical Chamfer Mills are made to mill a chamfer on an edge. They come with either three or five helical flutes to address the widest range of materials. These solid carbide tools come in diameter sizes from 1/8” to ¾”, and have included angles of 60, 90, and 120 degrees. These tools are not recommended for plunging countersinks.

Corner Rounding End Mills have three flutes and are double ended to provide maximum value. The cutter diameter and the cut depth are held to ±0.001 inch tolerance to provide ease of set-up.

Engraving Tools come in a large variety of angles and sizes. These solid carbide tools will engrave on a large variety of materials. The tool tip is held to ±0.001 inch tolerance for uniformity.

Spotting drills are a valuable first step in the holemaking process. The tool is solid carbide with a precise point angle that is held to a one-degree tolerance for true centering. Covering a wide range of sizes, it is available in 82°, 90°, 100°, 120° and 142°point angles. For optimal performance, choose a spotting drill angle that is equal or greater than the angle of the following drill.